The following are the two larger rod tapers which I did not get time to
send
yesterday 

1. Hardy Special .
This is a rod built for a local sports shop owner in the early 1960's. He
was a major seller of Hardy gear and they built this rod as a special for
him . It is measured over medium varnish , say .006. 
The rod is 3 piece , with each piece a little different in length to the
other .There is a special bag for the various lengths. I am not sure why the
lengths are different as the small differences do not seem to make a lot
of
difference in my inexpert mind. The cane length for each section is as
follows : tip 3'1" , centre 3'2" , butt 3'4" . 

1    086 , 083 , 085
5    97 , 95 , 100
10  115 , 118 , 117
15   135 , 135 , 139
20   154 , 156 , 153
25   167 ,165 , 166
30   186 , 180 , 179
35   198 , 198 , 195
ferrule
40   219 , 219 , 222
45   239 , 232 , 238
50   250 , 254 , 252
55   262 , 262 , 265
60   275 , 282 , 281
65   294 , 292 , 287
70   301 , 300 , 298
73   303 , 310 , 306
ferrule
78   309 , 311 , 311
80   316 , 316, 311
85   333 , 337 , 335
90   351 , 349 , 351
95   365 , 373 , 372
100  378 , 385 , 390
103 handle 
handle 12", uplocking seat 

2.Walker Bramption "Special"
A 10' , 2 piece rod which had no other information on it the the "special"
designation.
 I wanted to measure this rod as the previous WB rod showed more
variation
between flats then I expected ( seemed more like one of my own rods ) for
a
maker of  this quality . 

Measure over quite heavy varnish , say allow .006+

1   110 , 111 , 112
5   133 , 129 , 128
10  153 , 157 , 149
15   174 , 172 , 174
20   190 , 187 , 186
25   208 , 210 , 212
30   225 , 222 , 225
35   237 , 239 , 242
40   253 , 255 , 250
45   260 , 263 , 257
50   268 , 273 , 270
55   281 , 283 , 278
58   283 , 284 , 286
ferrule
65   309 , 304 , 305
70   326 , 331 , 328
75   349 , 345 , 346 , 
80   364 , 363 , 357
85   374 , 375 , 386
90   388 , 385 , 382
95   388 , 394 , 387
100   393 , 399 , 391
105   400 , 403 , 408
108   418 , 414 , 420 - handle 
handle 12"
uplocking reel seat.

Should there be any major inconsistancies in these figures it is probably a
transcribing error . ie .. blame me not the maker 

however , having gone through this measuring exercise with some care it
makes me feel better about my own efforts . 

regards 

Iank

######