SARUP Computer Resources  

Mission

To provide information technology resources and services that further the mission of the School of Architecture & Urban Planning.

Resources

Computer Labs: 
Three computer labs are available for student use (rooms 150, 158 and 194) and are generally open as follows:

Printing:
The 150 and 194 labs have PantherPrint devices that allow 8-1/2" x 11" and 11" x 17" prints on 20 lb. bond using a PantherPrint card, available in any Campus Computer Lab (e.g., Bolton 225). We also offer color and oversize printing which can be paid for with a Gold Card (student/faculty/staff ID). Following is what is available (all devices are in AUP150 and are available during open lab hours):

Black & White Plotting
An OCE TDS400 plotter provides 36" wide laser plots on bond paper at any length supported by the software. The cost is $.16 per square foot.

Color Printing
A Hewlett Packard LaserJet 5500 provides 8-1/2" x 11" and 11" x 17" color laser prints on a semi-gloss paper. The cost is $1.00 per square foot.

A Hewlett Packard 2500C provides 8-1/2" x 11" and 11" x 17" color inkjet prints on bond or photo paper. The cost is $3.00 per square foot.

Color Plotting
A Hewlett Packard DesignJet 1055CM Plus provides 36" wide inkjet plots on bond or photo paper at any length supported by the software. The cost is $3.00 per square foot.

42 Inch Wide Color Scanner - HP DesignJet Scanner 4200
You must provide your own blank CD media for the scanning.
 

Connect to SARUP Servers for Faculty & Staff

e3
The e3 website gives details for the laptop program.

Rapid Prototyping
Information about the 3D Printer and laser cutter.