"Engineering" is the general category name for theses and dissertations done at UWM from this department, which includes Computer Science, Applied Science, and a variety of other specialties. The base call number for all titles in this list is T 9999. This list is current as of 1 May 2008. More current titles may be searched in the Library Catalog, by a known author or title, or the base call number. The list is in call number order, which approximates an alphabetical list by author's last name. Doctoral dissertations are indicated by a (Ph.D.) at the end; all others are master's theses unless specified. All items are from the department "Engineering" unless noted in the entry; other specialties are as given in the thesis. A separate list is available arranged by subject specialty other than "Engineering."

UWM owned theses and dissertations located in the general collection can be checked out with a valid UWM ID card, or borrowed through standard interlibrary loan channels. UWM faculty, students, and staff have access to online full text of doctoral dissertations (1997-current) available from University Microfilms. To access these dissertations, click on Dissertation Abstracts under "Databases A-Z" from the UWM Libraries home page, then click on "customized interface" to be directed to the search page for Current Research @ University of Wisconsin-Milwaukee, or check the entry in the UWM Libraries catalog.

If the last name is known - go direct to that letter
A / B / C / D / E - F / G / H / I - J / K / L /
M / N - O / P - Q / R / S / T / U - V / W / X - Y - Z

---

Author Names: A

T 9999 .A1149x 1999	Ab Razak, Irwan A.     Combined sewer overflows and water quality before and after deep tunnels operation in Milwaukee, Wisconsin. 1999. (Ph.D.)
T 9999 .A115 1995	Ab Razak, Irwan A.     Sedimentation and PAH sources of the Kinnickinnic River between the Becker St. Bridge and the Wisconsin Wrecking Company. 1995. (Civil Engineering)
T 9999 .A121x	Abaza, Mahmoud F.     Distributed virtual memory systems. 1992. (Ph.D., Electrical Engineering)
T 9999 .A135	Abdalla, Mohammed E.     Permissible limits for one-handed lifts in the horizontal plane for female workers. 1981. (Industrial and Systems Engineering)
T 9999 .A1354 1999	Abdel-Hafez, Mamoun F.     Experimental investigation of internal flow structure transition through a tee junction. 1999.
T 9999 .A147	Abeysinghe, D. Nishanta.     Image interpretation using belief combinations. 1991. (Electrical Engineering)
T 9999 .A157	Aboye, Merid.     Theoretical and experimental investigation of condensation heat transfer enhancement on an inclined surface coated with a highly conductive porous substrate. 1992. (Mechanical Engineering)
T 9999 .A1649x	Abuhadba, Nada M.     Process parameter-growth environment-film property relationships for radio frequency reactive sputter deposited vanadium oxides in rare gas/oxygen discharges. 1992. (Ph.D., Materials Engineering)
T 9999 .A165	Abuhadba, Nada M.     Process parameters/film structure relationships for the rf sputter deposited Ge-O system. 1989. (Materials Engineering)
T 9999 .A166	Abulhamail, Mohammed Fawzi.     Analysis of normal modes of oscillation of multi-story buildings due to earthquake excitation forces. 1984. (Engineering Mechanics)
T 9999 .A16639x 1996	Abulnaja, Osama A.     High performance techniques for reliable execution of tasks under hardware and software faults. 1996. (Ph.D., Computer Science)
T 9999 .A1664	Abulnaja, Osama A.     Priority-based register allocation. 1990. (Computer Science)
T 9999 .A176x 1995	Achary, Jagadeesha.     Thermomechanical processing of ductile iron. 1995. (Ph.D., Materials Engineering)
T 9999 .A177	Achebe, Chukwuka R.     Lightning surges on overhead distribution lines caused by indirect and direct lightning strokes. 1975. (Electrical Engineering)
T 9999 .A1857 2005	Acord, Kim M.     Comparison of procedures for rescheduling due to machine breakdown. 2005.
T 9999 .A228	Adebayo, Oluwole B.     Flowable slurry containing foundry sand and fly ash. 1994. (Civil Engineering)
T 9999 .A234	Adhami, Manoochehr.     Roads and livable streets. 1983. (Civil Engineering)
T 9999 .A2619 2000	Agarwal, Basant.     Ultrasonic velocities and mechanical properties of aluminum-silicon carbide composites. 2000.
T 9999 .A283	Aguilar, Carlos.    Integration of multi-item production planning with transportation problem. 1981. (Industrial and Systems Engineering)
T 9999 .A285	Ahluwalia, Krishen Gopal.     Design of an optimal core steel slitting and inventory policy. 1976. (Systems Analysis)
T 9999 .A286	Ahmad, A. Kaid.     Peak period urban traffic estimation. 1981.
T 9999 .A287	Ahrenhoerster, Edwin R.     Objective analysis of computerized tomography images using neural networks. 1993. (Computer Science)
T 9999 .A312	Ajibola, Dan Adeyinka.     Simulation and performance analyses of Ethernet-type and permit control local area networks. 1984. (Computer Science)
T 9999 .A3132 2000	Akbulut. Fethiye N.     Faster factorization of integers of the form n=pq². 2000. (Computer Science)
T 9999 .A315	Akpan, Samuel G.     Simulation of filter performance. 1984. (Civil Engineering)
T 9999 .A316	Al-Hamli, Hisham Abdullatif Mohammed.     Rule-based expert system advisor. 1985. (Electrical Engineering)
T 9999 .A319x	Alangari, Khaled H.     Flexible manufacturing systems in the USA: objectives vs results: an empirical study. 1991. (Ph.D.)
T 9999 .A3195	Alapati, Sivaram P.     Process development for a permanent mold aluminum casting. 1991. (Industrial Engineering)
T 9999 .A3248 2004	Alba, Carlos A.    Relationship between land use patterns and highway widening. 2004.
T 9999 .A325	Albairutty, Mohammad H.    Internal and surface solidification of semi-transparent materials with solutions using B-splines collocation method. 1981.
T 9999 .A3335	Alberts, Daniel Gerard.    Determination of mass distributions in three phase abrasive water jet flow by scanning x-ray densitometry. 1989. (Mechanical Engineering)
T 9999 .A334	Alberts, T. E. (Thomas E.)    Material removal by application of submerged cavitating water jets under conditions of elevated ambient pressure and temperature. 1983.
T 9999 .A361	Aldereyaane, Alwaleed.    Cellular logic and memory array for a concurrent close-match search of character strings. 1984. (Electrical Engineering)
T 9999 .A366	Aleksy, Ronald.    Computer program replication on the PDP-8/L computer. 1971. (Electrical Engineering)
T 9999 .A371	Ales, Joseph M.    Design of shear tabs welded to tubular columns, by Joseph M. Ales Jr. 1990. (Structural Engineering)
T 9999 .A375	Alexander, Dennis W.    Welding and overlaying of al-bronze by the submerged arc welding process. 1983.
T 9999 .A384	Alexopoulos, George.    Analysis of an open-ended coaxial line by the method of moment. 1992. (Electrical Engineering)
T 9999 .A3856x 2001	Al-Fahoum, Amjed S.    New techniques in impact-echo imaging. 2001. (Ph.D.)
T 9999 .A397	Alhinai, Waddah T.    Heat transfer analysis of the one-dimensional solidification of binary eutectic alloys with temperature-dependent thermophysical properties. 1983. (Mechanical Engineering)
T 9999 .A3973 2003	Al-Hourani, Farouq    Investigation of factors affecting implementation rates in small and medium size companies. 2003.
T 9999 .A39731x 2004	Al-Hourani, Farouq.    Machine cell formation for design and management of automated and cellular manufacturing systems, by Farouq A. Al-Hourani. 2004. (Ph.D.)
T 9999 .A3984x 2004	Ali, Mehboob Muzzammil.    Environmentally induced crack propagation in inconel alloys 600 and 690 under hydrogen supersaturated steam. 2004. (Ph.D.)
T 9999 .A414 (MC)	Alix, Kenneth W.    Variable intensity graphics system. 1978. (microfiche copy only) (Electrical Engineering)
T 9999 .A4154 2003	Al-Khatib, Fadi D.    Stress computation and fracture prediction in the femur's neck due to approximated side fall conditions: 3-D finite element investigation. 2003.
T 9999 .A416x	Allam, Mahmoud E.    New approach for wideband array processing. 1994. (Ph.D., Electrical Engineering)
T 9999 .A444	Alm, Eugene J.     Microcomputer implementation of digital filters. 1979. (Computer Science)
T 9999 .A4445	Almadi, Abdulaziz Nasser.     Effects of local curvature change on state of stress in a highly stressed wire hoop. 1988. (Structural Engineering)
T 9999 .A44452x 1996	Almadi, Abdulaziz Nasser.     On new foundations of kinematics using classical and modern algebraic theory and homotopy. 1996. (Ph.D., Mechanical Engineering)
T 9999 .A446	Almattar, Sami.     Step signal detection and estimation via clustering analysis with Gaussian contamination. 1988. (Electrical engineering)
T 9999 .A453	Alokby, Ahmed.     Synchronized chaos. 1995. (Electrical Engineering)
T 9999 .A461	Alshuwaib, Saad A.     Laser-based location measurement of structures. 1980.
T 9999 .A6348 2006	Antonneau, Nathan T.     Effect of differential pressure on airborne contaminant levels during interior hospital renovation. (Notes: CD-ROM in back of book.) 2006.
T 9999 .A4645	Altall, Jihad.     Load and resistance factor design criteria for local buckling of circular tubular members. 1986. (Civil Engineering)
T 9999 .A465	Altan, Birol A.    Utilization of the condenser discharge water of steam power plants. 1973. (Electrical Engineering)
T 9999 .A4687 2000	Altiti, Jawad A.    Message stability detection in reliable multicast protocols. 2000. (Computer Science)
T 9999 .A512	Amer, M. H.    Non-destructive testing of resistance welding in the automotive industry, by Mohamed H. Amer. 1980.)
T 9999 .A5165	Amin, Bimal.    Reliability of describing function predictions for systems with friction. 1993. (Electrical Engineering)
T 9999 .A517	Amini, Behzad.    Comparative study of criteria for elastic-plastic fracture. 1985. (Engineering Mechanics)
T 9999 .A5172x	Amini, Behzad.    Initiation and quasi-static crack growth in elasto-plastic fracture mechanics. 1991. (Ph.D.)
T 9999 .A5275 2002	Amro, Akef Y.    Finite element analysis of extended shear tab steel connections. 2002.
T 9999 .A5278 2002	Amrutur, Sreenivasan R.    Location tracking in an indoor fading environment using signal strength measurements. 2002.
T 9999 .A549	Anderson, Scott J.    Nitrification and denitrification of municipal secondary effluent. 1979. (Sanitary Engineering)
T 9999 .A587	Angers, Melanie.    Rule-based C code checker. 1988. (Electrical Engineering)
T 9999 .A5875 2004	Anggara, Dominick Ciauwindarto.    Testbed for tools supporting software document evolution: design and application to the software concordance. 2004. (Computer Science)
T 9999 .A589	Angle, Michelle Ganiere.    Cellular approach to eddy current analysis. 1990. (Electrical Engineering)
T 9999 .A593	Angst, David Richard.    Characterization of the processability of NiTiHf alloys. 1992. (Materials Engineering)
T 9999 .A615	Annis, Jeffrey R.    Dynamic behavior of a mass element with a spring connection at the free end of a cantilever beam due to support motion. 1982. (Engineering Mechanics)
T 9999 .A61	Ansary, Adel I.    8097 microcontroller based motion control system, by Adil Ansari. 1987. (Electrical Engineering)
T 9999 .A635	Antonopoulos, Greg I.    Microcomputer application to monitor and protect induction motors. 1987. (Electrical Engineering)
T 9999 .A664	Arbiture, William.    Development of speckle correlation techniques for displacement analysis of a cylindrical pipe. 1985.
T 9999 .A721	Arkalgud, Manjunath K.    Study of artificial intelligence techniques in VLSI CAD. 1987. (Electrical Engineering)
T 9999 .A7648 2000	Arnott, David W.    BOD and fecal coliforms of combined sewer overflows in Milwaukee, Wisconsin. 2000.
T 9999 .A7697 2002	Arora, Manjeet Singh.     Multi-objective design of multi-stage gear trains. 2002.
T 9999 .A76973 2004	Arora, Sidharta.     Source apportionment of PAHs in sediments using factor analysis by compounds and time records: application to Sheboygan River, Wisconsin and Lake Michigan. 2004
T 9999 .A777	Arrizabalaga, Federico.     Finite element lake model with variable eddy viscosity coefficient. 1974. (Civil Engineering)
T 9999 .A779	Arrufat-Lucena, Enrique.     Minicomputer and memory scan converter system, for digital image processing. 1977. (Electrical Engineering)
T 9999 .A835	Aslaksen, Theron D.     Quantification of comfort and convenience factors for behavioral mode split models. 1973.
T 9999 .A838 1997	Aspenleiter, Stephen W.     Recognizing a video sequence within a video library. 1997. (Computer Science)
T 9999 .A844	Assa, Jacob.     Analysis of using forecast for setting job center's service rate. 1976.
T 9999 .A853x	Asthana, Rajiv.     Infiltration processing of silicon carbide platelet-reinforced aluminum alloy composites . 1991. (Ph.D., Materials Engineering)
T 9999 .A862	Atandare, Dan L.    Electric field of a twin-bundle conductor transmission line with ground considered. 1973. (Electrical Engineering)
T 9999 .A865	Athanasiou, Thomas C.    Reliable execution of real-time tasks. 1993. (Computer Science)
T 9999 .A923	Augustine, Kurt Ernest.    Survey of hidden surface algorithms and other methods for producing realistic 3-D images. 1988. (Computer Science)
T 9999 .A958	Aviles Taylor, Luis.    Reliability study of the fully-sectionalized and looped-in supply: a measure of service continuity. 1975. (Electrical Engineering)
T 9999 .A9639x 2002	Awad, Fahed H.    Coexistence techniques for ISM band wireless services, by Fahed Hasan Awad.. 2002. (Ph.D.)
T 9999 .A964	Awad, Fahed H.    Learning finite-state automata: a practical approach. 1994. (Electrical Engineering)
T 9999 .A981	Aylward, Christine Yuan.    Implementation of computer-based automation in foundries. 1990.
T 9999 .A974 2007	Aycan, Cagatay.    Seismic and reliability analysis and optimization of overhead cranes. 2007.
T 9999 .A991	Azad, Kamran Ajdari.    Switched-capacitor filter design. 1983. (Electrical Engineering)
T 9999 .A9923 1998	Azcorra-Valdez, Carlos A.     Pull-out strength of L-bolt anchored on masonry. 1998.

Return to Top of Alphabetical List

Author Names: B

T 9999 .B1117 2005	Baas. Bryan.    Identification of plants from leaf samples. 2005. (Computer Science)
T 9999 .B1158 2002	Babu, Baiju Zacharia.    Effect of fiber-mat compression and architecture on the unsaturated flow in liquid composite molding: an experimental study. 2002.
T 9999 .B1285	Bacon, Jason W.    Emulation of a distributed virtual memory system. 1992. (Computer Science)
T 9999 .B136	Badiee, Behzad.    Topology adoption and design specification of a LAN. 1986. (Electrical Engineering)
T 9999 .B142	Baeza, Ignacio.    Mathematical model for sediment transport in a stratified continuous variable flow. 1982. (Civil Engineering)
T 9999 .B144	Bagherlee, Amir.    Treatment of the convection diffusion phenomena by finite element methods. 1988.
T 9999 .B151	Bahr, John P.    Job shop decoupled inventory management system using a time sharing computer. 1968. (Mechanical Engineering)
T 9999 .B153	Bail, Marvin Adolph.    Experimental investigation of the three lowest lateral and torsional natural frequencies of axial flow fan blades of uniform section. 1969. (Mechanical Engineering)
T 9999 .B1676 2005	Baker, Christopher Adams.    Design and construction of a high-speed near-infrared imaging system for functional noninvasive bioimaging. 2005.
T 9999 .B184	Bales, James A.    Question/answering system for dairy farmers. 1981.
T 9999 .B212	Banaag, Jose Carlos N.    Maximum acceptable weights, heart rates, ratings of perceived exertion and static strengths for one-hour repetitive symmetric and asymmetric lifting. 1988.
T 9999 .B214	Bandt, Keith E.    Comparison study of two rainfall-runoff mathematical models and the adequacy of hydrologic input data. 1981.
T 9999 .B225	Baranowski, John F.    Electrical design of a distribution pancake transformer. 1983.
	Barnes, Thomas Denzil.    see     Barnes, Thomas. [.B621]
	Barrios, Angel    see     Barrios Garcia, Angel. [.B276]
T 9999 .B276	Barrios Garcia, Angel.    Object-oriented design and program for computational number theory and cryptography, by Angel Barrios. 1993. (Computer Science)
T 9999 .B297	Basagoiti, Javier.    Prediction of effluent suspended solids concentration during backwashing. 1985. (Civil Engineering)
T 9999 .B2989x	Bashir, Abdel Fatah M.    Hardware graph algorithms for VLSI implementation. 1988. (Ph.D., Electrical Engineering)
T 9999 .B299	Bashir, Abdel Fatah M.    Statistical study of the performance of a task scheduling algorithm, by Abdelfatah M. Bashir. 1979. (Digital Systems and Computers)
T 9999 .B3133 2001	Basin, Ilya.     Internet-based energy management systems. 2001.
T 9999 .B351	Baus, Ronald G.    Measuring the flexibility of a flexible manufacturing system. 1994. (Industrial and Management Engineering)
T 9999 .B355	Baxa, Michael Steven.    Effect of NaCl and shot peening on the corrosion fatigue of AISI 6150 low-alloy steel. 1975. (Materials Engineering)
T 9999 .B395	Becker, Donald William.    Study of the strength and fracture modes of soldered and brazed joints in copper and incramute I. 1975.
T 9999 .B396	Becker, Ralph A.    General concept for the revitalization of a downtown area. 1970. (Civil Engineering)
T 9999 .B415	Beffel, Charles E.    Investigation of the applications of a programmable cellular logic array. 1974. (Electrical Engineering)
T 9999 .B4154	Beffel, John Charles.    Curing temperature effects on high-performance concrete properties. 1995. (Civil Engineering)
T 9999 .B422	Beiermeister, Ralph John.    Study of characteristics of bituminous soil stability. 1967. (Civil Engineering)
T 9999 .B423	Beisner, Richard C.    Coal-based trigeneration by an electric utility. 1981.
T 9999 .B4244 2001	Bekele, Solomon.    Water quality of the three major rivers of Milwaukee, Wisconsin and traffic volume. 2001.
T 9999 .B4294 2004	Belger, Michael A.    Aluminum composite castings incorporating used and virgin foundry sand as particle reinforcements. 2004.
T 9999 .B442	Beller, Daniel A.    Comparison of psychophysically determined maximum acceptable weights, static and dynamic lifting strengths. 1989. (Industrial Engineering)
T 9999 .B4424x 2001	Bellford, Russell B.     Stage-wise decision making for the capacity planning and control of telecommunications switching systems. 2001. (Ph.D.)
T 9999 .B4677 2005	Benish, Neal Roger.    Methods of non-destructive evaluation for Wisconsin highway bridge structures. 2005.
T 9999 .B469	Bennage, Walter A.    Structural optimization using simulated annealing and tabu search. 1994.
T 9999 .B472	Bennewitz, James H.    Development of an objective speckle measurement system utilizing fiber optics and photoelectronic-numerical processing. 1983.
T 9999 .B474	Bensler, Henry P.    Saturated forced-convective boiling heat transfer with twisted-tape inserts. 1984. (Mechanical Engineering)
T 9999 .B482	Bera, Madan Mohan.    Design of a digital data transmission system for the interconnection of two computers. 1972. (Electrical Engineering)
T 9999 .B489	Berentsen, Guy R.    Natural Language System Interface using augmented transition networks. 1986. (Computer Science)
T 9999 .B492x 1996	Berezowitz, William A.    Methodology for quality design and development of high technology products. 1996. (Ph.D.)
T 9999 .B5515 2007	Bertsch, Matthew T.    Improving the fatigue life and reliability of a concrete mixing shaft. 2007.
T 9999 .B5744	Bharadwaj, Ramasesh.    Effect of heat treatment on the sulfide crack resistance of an API X-80 steel. 1994. (Materials Engineering)
T 9999 .B5745	Bhat, Shrikant.    Orthogonal curvilinear grid generation system for 2-D depth-averaged flow modeling. 1993. (Civil Engineering)
T 9999 .B575	Bhatnagar, Veena.    Maximum acceptable weights for sitting posture. 1992. (Industrial and Systems Engineering)
T 9999 .B5755 2005	Bhattarai, Kalu.    New reactive power optimization model in rectangular coordinates. 2005.
T 9999 .B5834 2000	Bickel, Tim.    Shear strength of adhesive anchors. 2000.
T 9999 .B586	Bieberitz, John A.    Area wide impacts of ramp metering. 1994.
T 9999 .B592 2007	Biggin, David F.    Effect of interference fit assembled components on geared shaft deflection. 2007.
T 9999 .B6199x	Bischke, Robert F.    Economic dispatch to a predetermined load. 1979. (Ph.D.)
T 9999 .B621	Barnes, Thomas Denzil.    Design of planetary gear drives for mining shovels with consideration of the effects of planet location errors. 1991. (Electrical Engineering)
T 9999 .B623	Bischke, Robert F.    Surface-wave induced desorption form single-crystal quartz. 1974.
T 9999 .B6235	Bishwabandhu, Ray.    Integral equation analysis of multilayered anisotropic dielectric waveguides with application to ARROW structures. 1994. (Electrical and Computer Engineering)
T 9999 .B627	Black, Gerald W.    Effect of suspension geometry on vehicle steering response. 1981. (Engineering Mechanics)
T 9999 .B629 1997	Blackmon, Brian K., M.S.    Growth of radio frequency sputter deposited vanadium pentoxide thin films on rough and smooth surfaces. 1997. (Materials Engineering)
T 9999 .B634	Blaibel, Fadel.    Methods of solving equations of linear systems on computers with parallel processors. 1981. (Electrical Engineering)
T 9999 .B635	Blair, Richard A.    Microcomputer system for motor drive applications. 1984. (Electrical Engineering)
T 9999 .B636	Blake, James E.    Experimental reflectivity of molten sodium in the wavelength range of 1 to 15 um. 1981. (Mechanical Engineering)
T 9999 .B6367 1996	Blake, John D.    Grooved surface rewettin. 1996. (Mechanical Engineering)
T 9999 .B642	Blank, Mitchell N.    Very high level languages as user-system interfaces in a data processing environment. 1974.
T 9999 .B643	Blankenberg, Raymond N.    Bay View urban redevelopment project. 1968.
T 9999 .B644	Blasinski, Daniel A.    GLASS: a simulation of the St. Lawrence Seaway system. 1977. (Systems Engineering)
T 9999 .B6476x 1999	Blessing, Jeffery J.    Efficient network design using heuristic and adaptive methods. 1999. (Ph.D.)
T 9999 .B648	Blimke, John W.    Frequency-dividing transposer, first and second frequency-shifting transposers. 1977. (Electrical Engineering)
T 9999 .B651	Block, Jeffrey B.    Reconstruction of the two-dimensional acoustical velocity and attenuation distribution of the brain using an algebraic reconstruction technique. 1976.
T 9999 .B658	Bluemner, Ervin J.    Digital image processing, by Ervin J. Bluemner, Jr. 1980. (Electrical Engineering)
T 9999 .B671	Boehnlein, Albert J.    Application of fiber optics to ultra low frequency holography. 1983.
T 9999 .B674	Bogdan, Eniko.    Turtle graphics on a functional platform. 1990. (Computer Science)
T 9999 .B676	Bohlman, Kurt E.    Self assessment tool for energy conservation for the paperboard boxes and containers industry. 1994. (Industrial Engineering)
T 9999 .B6872 2003	Bolaki, Pankaj.    Empirical analysis of fault detection effectiveness of system-level n-way test suites. 2003. (Computer Science)
T 9999 .B6873 2002	Boldt, Joseph A.    Bridge approach settlement mitigation: review and analysis. 2002.
T 9999 .B693	Boloorchi-Fard, Gholamali.    Shear connections to tubular columns. 1995. (Structural Engineering)
T 9999 .B728	Borden, Cecelia Mary.    Performance evaluation of a file structure for storing a materialized transitive closure. 1992. (Computer Science)
T 9999 .B734	Borkowski, Raymond J.    Flow of a dilatant fluid through fractured porous media. 1979.
T 9999 .B7353 2004	Borland, Andrew J.    Effect of casting defects on the fatigue behaviour of an Al-Si eutectic high pressure die casting alloy. 2004.
T 9999 .B749	Botic, James S.    On the topological synthesis of networks. 1971. (Electrical Engineering)
T 9999 .B7492x	Botic, James S.    Triggering and control of inference processes. 1983. (Ph.D.)
T 9999 .B751	Botticelli, Marie.    Computerized proprietary security system. 1977. (Computer Science)
T 9999 .B789	Boyd, Lawrence W.    Source and degree of fecal contamination in the Kenosha Harbor. 1970. (Civil Engineering)
T 9999 .B799	Bradford, Craig Vance.    Synthesis of biquadratic RC driving-point impedances with equal-valued capacitors and a possible negative resistor. 1974. (Electrical Engineering)
T 9999 .B811	Bradley, Jeffrey F.    Effect of temperature, exposure time, and initial particle size composition on the agglomeration rate of coal and flyash. 1978. (Energy Conversion)
T 9999 .B814	Braier, Thomas J.    Natural convective heat transfer in electrical transformers. 1980.
T 9999 .B817	Brand, Larry E.    Strength of high-strength concrete beams with shear reinforcment. 1991. (Civil Engineering)
T 9999 .B821 1998	Brandt, Donald A.    Method for the reduction of the peak unbalance response of a rotor operating through its first critical speed. 1998.
T 9999 .B8212 1999	Brandt-Piszczek, Amy.    Application of flow manufacturing. 1999.
T 9999 .B8214 1998	Branecky, Brian T.    Power factor control for increased induction motor efficiency. 1998.
T 9999 .B825	Braun, Daniel E.    Design of a pneumatio-mechanical governor. 1972. (Systems Design)
T 9999 .B8255	Braun, Dennis H.    Secondary thyristor control of AC wound rotor motors as applied to hoist and traverse drives. 1979. (Electrical Engineering)
T 9999 .B837	Brendelson, James C.    Robust controller design applied to nonlinear dynamic systems. 1993. (Mechanical Engineering)
T 9999 .B842 1998	Bresenham, Damon Ford.    Assessment of proposed Spindt method expansions for use with highly oxygenated fuels in small utility engine emissions testing applications. 1998.
T 9999 .B854	Briggs, Kathleen L.    Investigation of the effects of Fresnel optics and pyramidal prisms on the voltage production of photovoltaic microgenerators in filtered light. 1981.
T 9999 .B8564 1999	Brignoni, Luis A.    Heat transfer from enhanced surfaces in air jet impingement and suction. 1999.
T 9999 .B858	Brinck, Wolfgang.    Issues in the design of Pose, an editor for three-dimensional jointed figures. 1987. (Computer Science)
T 9999 .B8585	Brindis, Charles.    Real-time anesthesia simulator. 1991. (Computer Science)
T 9999 .B8645 1998	Brodersen, Brian S.    Utilization of post-consumer plastics as a filler in concrete. 1998.
T 9999 .B874	Broskovetz, Frank J.    Object oriented approach to the blackboard model. 1989. (Computer Science)
T 9999 .B878 1996	Brown, Gregory Howard.    Three-dimensional groundwater model of natural and constructed wetlands near Wilton, Wisconsin. 1996. (Civil Engineering)
T 9999 .B888 1997	Bruckner, John J.    Cryogenics for stabilization of surface analysis samples and the treatment of alloys. 1997. (Materials Engineering)
T 9999 .B917	Bublitz, William Stillman.    Role of the municipal engineer in sewage treatment plant expansion. 1965. (Civil Engineering)
T 9999 .B918 1997	Buchberger, Susanne Bettina.    Remedial Action Assessment System (RAAS): parameter study. 1997. (Environmental Engineering)
T 9999 .B924	Buckle, Gregory Robert.    Two-dimensional laterally integrated open channel flow model. 1987. (Civil Engineering)
T 9999 .B9283 2004	Buechel, Craig A.    Development of a vertical motion liquid damper (VMLD). 2004.
T 9999 .B9317 2000	Bui, Dung V.     Applying an artificial neural and network to tolerate saturated currents: exprimental [i.e. experimental] tool and implementation. 2000. (Computer Science)
T 9999 .B932	Bukowski, Daniel J.    Semisystolic array implementation of the discrete Fourier transform. 1986. (Electrical Engineering)
T 9999 .B955	Burgess, Robert.    Object-oriented approach for image synthesis. 1989. (Computer Science) (2c)
T 9999 .B961	Burli, Srinivas.    Interfacial structure studies in horizontal bubbly two-phase flow. 1990. (Mechanical Engineering)
T 9999 .B9673 2001	Burns, Eferin.    Improved PID controller tuning scheme. 2001. (Mechanical Engineering)
T 9999 .B977	Buscher, Franklin Charles.    Study of oxygen injection with a submerged lance in acid lined electric arc melting of steel, by Franklin C. Buscher, Jr. 1969. (Metallurgical Engineering)
T 9999 .B9774	Buschhaus, A.    PCB transport modelling study for a lake-river system. 1993.
T 9999 .B9775	Buser, Dale J.    Analysis of dated sediment cores from Lake Michigan's Green Bay for polychlorinated biphenyls. 1985. (Civil Engineering)
T 9999 .B979	Buske, Jeff.    Algorithmic composition with MIDI. 1990. (Computer Science)
T 9999 .B981	Buss, Daniel F.    Application of the constant rate dye injection/dilution technique for determining industrial wastewater discharge rates. 1978.
T 9999 .B9814 1996	Busse, Dale T.    User friendly encryption. 1996. (Computer Science) (2c)
T 9999 .B9832x 2006	Butarbutar, Manonton.    Searching and indexing text documents based on topic identification. 2006. (Ph.D.,"Electrical Engineering & Computer Science")
T 9999 .B983	Butarbutar, Manonton.    Algorithms for lossless image compressions. 1991. (Computer Science)
T 9999 .B9869x 2000	Butler, Shaoluo Liu.    Methods for dynamic analysis, control and optimization of large structures. 2000. (Ph.D.)
T 9999 .B9939x 2005	Bzdusek, Philip A.    PCB or PAH sources and degradation in aquatic sediments determined by positive matrix factorization. 2005. (Ph.D.)
T 9999 .B9994 2003	Bzdusek, Philip A.     Fine-grained sediment transport in the Sheboygan River Inner Harbor, Sheboygan, Wisconsin, USA. 2003.

Return to Top of Alphabetical List

Author Names: C

T 9999 .C1188 2001	Caceres, Diego.    Exhaust emissions deterioration over the life cycle of small utility engines. 2001.
T 9999 .C143	Calbaum, Mike.    Generating distributed C++ objects in a network of Unix workstations. 1992. (Computer Science)
T 9999 .C147	Caldwell, Frank J.    Interactive programming for shaft design and analysis, by Frank J. Caldwell, Jr. 1985. (Mechanical Engineering)
T 9999 .C167	Calvert, Kerry W.     Automatic recognition of polyhedra in a digitized image. 1982.
T 9999 .C178	Cambridge, Richard William.    Automation strategies for batch manufacturers, by Richard William Cambridge, Jr. 1985. (Digital Systems and Computers)
T 9999 .C183	Camitta, Marsha Lane.     Atomic actions and recovery blocks in fault tolerant distributed systems. 1986. (Computer Science)
T 9999 .C212	Canales, Fredy P.    Determination of plutonium 238 and 239, 240 in Lake Michigan sediments. 1986. (Civil Engineering)
T 9999 .C2238 2000	Caniza, Julious.    Cast-on-node of A356 aluminum alloy to join wrought 6061-T6-511 and 6063-T52 aluminum alloys. 2000.
T 9999 .C2666 2004	Cardenas, Pedro.    Reliability and redundancy optimization using genetic algorithms. 2004.
T 9999 .C2835	Carlson, Beverly Lynn.    Ergonomic job evaluation of nursing assistants at Rock County Health Care nursing home facility. 1989.
T 9999 .C284	Carlson, Dennis L.    Study of induction hardening chain sidebars to increase fatigue strength. 1978.
T 9999 .C287 1996	Carmody, Joseph P.    Improved discrimination criteria for correlation-based comparison of nearly identical analog signatures. 1996. (Electrical Engineering)
T 9999 .C289	Carneiro, Mervyn Joseph.    The effect of forced convection on enhanced film condensation within a porous substrate. 1992. (Mechanical Engineering)
T 9999 .C294	Carpenedo, Donald W.    Implementation of an algorithm to compute available expressions. 1978. (Electrical Engineering)
T 9999 .C337 1996	Case, Christofer C.    Growth and deposition of silica particles in a solution stirred in the presence of a magnetic field. 1996. (Mechanical Engineering)
T 9999 .C3424 2002	Casper, Daniel J.    Characterization of a silica-supported iron Lewis acid catalyst. 2002.
T 9999 .C348	Casteleiro, Manuel.    Numerical solution for the drainage process in dredgings. 1972. (Civil Engineering)
T 9999 .C352 1996	Castillo, Adelina D.    Development of a cellular manufacturing system for automotive parts: a case study. 1996.
T 9999 .C3722x 2007	Caulfield, Suzanne.    Computational study of the air/fuel mixture in a small spark ignition engine. 2007. (Ph.D.)
T 9999 .C3723 2000	Caulfield, Suzanne.    Prediction of the heat transfer coefficients and surface temperatures on a finned heated cylinder using computational fluid dynamics. 2000.
T 9999 .C426	Chabbra, Mohinder.    Study on the open-ended coaxial line method for measuring the permittivity of materials at microwave frequencies. 1989. (Electrical Engineering)
T 9999 .C434	Chai, John C.    Higher order turbulence closure models and applications to backward-facing step and jet flows. 1988. (Mechanical Engineering)
T 9999 .C4556x	Chang, Chang-Tsair.    Hydrodynamic and thermal field characteristics of two-phase jet impingement flows. 1992. (Ph.D., Mechanical Engineering)
T 9999 .C4557	Chang, Chang-Tsair.    Solubility and polymerization kinetics of amorphous silica in aqueous solutions. 1986.
T 9999 .C456	Chang, Chi-Yu.    Thermodynamic properties of polyamides: nylon-6, nylon-6, 10 and nylon-7. 1980. (Mechanical Engineering)
T 9999 .C45615 2000	Chang, Eric Chung-Hui.    Distributed motion coordination of two robots carrying a ladder in a corridor with a 90 degree turn. 2000. (Computer Science)
T 9999 .C4563	Chang, Han-Min.    Approach to designing an information access server. 1989. (Computer Science)
T 9999 .C4564x	Chang, Tzu-Chieh.    DOA estimation on coherent narrowband and wideband signals. 1990. (Ph.D., Electrical Engineering)
T 9999 .C4565	Chang, Tzu-Chieh.    Hartley transform algorithms. 1986. (Electrical Engineering)
T 9999 .C45829x 2005	Channarukul, Songsak.    Multimodal content adaptation for heterogeneous devices. 2005. (Ph.D.)
T 9999 .C4583 1999	Channarukul, Songsak.    YAG: a template-based natural language generator for real-time systems. 1999. (Computer Science)
T 9999 .C4584 2001	Chanodia, Parisha.    Use of wood ash in flowable slurry and concrete. 2001.
T 9999 .C461	Chao, Chung-Yao.    Thermodynamic study of Ta-Rh alloys using a galvanic cell with solid oxide electrolyte. 1977. (Materials Science)
T 9999 .C466 1997	Chapman, Mark T.    Hiding the hidden: a software system for concealing ciphertext as innocuous text. 1997. (Computer Science)
T 9999 .C4674 1999	Chappelle, Jason A.    Design of a solar water purification device. 1999.
T 9999 .C473	Chari, Vurptoor S.    Functional classification of the Great Lakes-St. Lawrence Seaway ports. 1975. (Systems Design)
T 9999 .C483	Charnon, Sheila Tobin.    Public perception of direct potable reuse of wastewater. 1993. (Civil Engineering)
T 9999 .C4926 2003	Chatterjee, Ambarish.    Development of localized sensors for the characterization of tissues. 2003.
T 9999 .C512	Chavarria M., Jose L.    Parallel processing strategy for computing transitive closure of a database relation. 1988. (Computer science)
T 9999 .C5123 1999	Chavez, Victor O.    Automated order filling system for small and medium size companies. (Includes 1 disk) 1999.
T 9999 .C5146 1999	Checker, Vikas.    Effect of cryogenic treatment on 1045C steel, 4140 alloy steel, and A-2 tool steel. 1999.
T 9999 .C51715	Chen, Binglai.    Multigrid methods in image processing. 1993. (Electrical Engineering)
T 9999 .C5172	Chen, Cheng-Tien.    Automatic drawing conversion system: a descriptive study of systems and conversion algorithms. 1989.
T 9999 .C5173	Chen, Chin-Yuan.    Implementation of a file transfer, access, and management protocol on Gateway Local Area Network. 1986. (Ph.D., Computer Science)
T 9999 .C5174x	Chen, Ching-Lin, 1951-     Simulation of hydrodynamics and water quality in a well-mixed estuary by using finite element methods. 1985. (Ph.D.)
T 9999 .C5175	Chen, Chuan-Hsing.    Study of smoldering rate and carbon monoxide emission of teflon. 1975.
T 9999 .C51753	Chen, Chung-Yuan.    Oxygen uptake rate for activated sludge process evaluation. 1982. (Sanitary Engineering)
T 9999 .C51754x	Chen, Chung-Yuan.    Unified theory for multiple toxicity and nutrient limitation in the aquatic environment: with application of Weibull, probit, and logit models. 1984. (Ph.D.)
T 9999 .C517546	Chen, Daniel.    Graphical user interface design and implementation for industrial power system applications. 1994. (Electrical Engineering)
T 9999 .C51755	Chen, Der-Yawn.    Effect of finite geometry of orthotropic, anisotropic and spatially variable orientation plates with stress concentrations around the circular hole. 1980. (Civil Engineering)
T 9999 .C51756 2003	Chen, Hua.    Corrosion of heat treated cast stainless steel. 2003.
T 9999 .C51757	Chen, I-Hsien.    Comparative study of performance of load balancing algorithms for homogeneous distributed systems. 1994. (Electrical Engineering)
T 9999 .C5176	Chen, Ing-Youn.    Criteria of surface selective withdrawal in a stratified fluid. 1979.
T 9999 .C51762x	Chen, Ing-Youn.    Heat transfer analysis of a falling-film horizontal tube evaporator. 1984. (Ph.D.)
T 9999 .C51763x 2000	Chen, James Pey.    Transient structures of methane-air counterflow diffusion and partial premixed combustion under varying frequencies. 2000. (Ph.D.)
T 9999 .C51765	Chen, Kuo-Pin.    Effect of outlet structures on the criteria of selective withdrawal. 1980.
T 9999 .C51767	Chen, Li-Mei.    PCBs in dated sediment cores from Lake Michigan. 1985. (Civil Engineering)
T 9999 .C517672x	Chen, Li-Mei.    Studies of YBa2Cu3O7-x materials and layered thin films: their growth and interdiffusion behavior, Fermi edge density, and the oxygen depletion problem. 1992. (Ph.D., Materials Engineering)
T 9999 .C51768	Chen, Shin-Tzo.    Programing languages and computer graphics assessment in power system. 1987. (Electrical Engineering)
T 9999 .C51769x	Chen, Shin-Tzo.    Weather sensitive short-term load forecasting using non-fully connected artificial neural networks. 1991. (Ph.D., Electrical Engineering)
T 9999 .C5177	Chen, Sui-Ping.    Memory reallocation in a real-time system. 1979. (Electrical Engineering)
T 9999 .C51772 1996	Chen, Tieniu.    Effects of iron (III) ions on silica fouling. 1996. (Mechanical Engineering)
T 9999 .C517723x 2000	Chen, Tzer-Yi.    Development of thermally controllable protein columns and novel biological inhibitors for the mitigation of calcium carbonate fouling and scale formation on heat transfer surfaces through genetic engineering. 2000. (Ph.D.)
T 9999 .C517727 2004	Chen, Yau Min.    Heat pipe drilling application: an experimental study. 2004
T 9999 .C51773	Chen, Yung-Feng.    Performance evaluation of an algorithm for computing transitive closure in distributed systems. 1990. (Electrical Engineering)
T 9999 .C517736	Chen, Zhengyuan.    Time optimal motion of two robots carrying a ladder under a velocity constraint. 1994. (Computer Science)
T 9999 .C51774	Chen, Zhijiang.    Effects of sodium (Na+), potassium (k+) and iron (III) ions on silica fouling, and effect of magnetic field on silica deposition. 1992. (Mechanical Engineering)
T 9999 .C51775	Cheng, Jyun-Cheng.    Dynamics of closed loop manipulators. 1987. (Mechanical Engineering)
T 9999 .C51776x	Cheng, Jyun-Cheng.    Synthesis of mechanisms using homotopy methods including considerations of rotatability, circuit defect and branch defect. 1992. (Ph.D., Mechanical Engineering)
T 9999 .C5178	Cheng, Meng-Dawn.    Oxygen uptake rates in the activated sludge process: a double substrate model. 1983. (Civil Engineering)
T 9999 .C518	Cheng, Yi-Wen.    Effect of tin and copper additions on temper embrittlement susceptibility of an alloy steel. 1973. (Metallurgy)
T 9999 .C5185	Chen, Yuchia Otis.    Thermodynamics and phase relationship of cobalt-sulfur system. 1977. (Materials Engineering)
T 9999 .C5188	Cheong, Wing Yaw.    Two-dimensional finite element sediment transport model. 1988.
T 9999 .C5193	Cherian, Sheela.    Viscoelectric effect in moving dielectric liquids. 1994. (Electrical Engineering)
T 9999 .C5194 2007	Cherkashina, Elena.    3-D model of the electrical properties of the female breast. 2007.
T 9999 .C5195	Chern, Chin Feng.    Theoretical study of flow structure and radiation for multiphase turbulent diffusion flames. 1989. (Mechanical Engineering)
T 9999 .C521	Chern, Jyh-Huei.    Photoelectronic-numerical data acquisition and analysis of holographic interferograms. 1985.
T 9999 .C5218 2001	Chernyakova, Liya.    Approximate semantics for binary relation analysis. 2001. (Computer Science)
T 9999 .C526	Cheung, Elinor Lee.    Dimension reduction by post clustering techniques. 1973. (Computer Science)
T 9999 .C5317 1996	Chi, Susan.    PCB congener patterns of sediments from the Milwaukee Harbor Estuary: implications for sources, transport and biodegradation. 1996. (Civil Engineering)
T 9999 .C532	Chiang, Tien-Hon.    Equation of state: (I) - terminal solid solution of zinc in palladium and (II) - dilute solution of oxygen in binary liquid metals. 1975. (Materials Science))
T 9999 .C5325	Chien, Gaan-Tieng P.    Effect of internal heat generation on solidification. 1980.
T 9999 .C53253 1995	Chidambaram, Arun.    New approach to solve for the global minimax point when the demand points are located on a sphere. 1995. (Industrial and Manufacturing Engineering)
T 9999 .C53255	Chidambaram, Shankar.    Determining the permittivity of printed circuit board substrates using a quasi-analytic microstrip model. 1993. (Electrical Engineering)
T 9999 .C533	Chien, Nan-Kwang.    Trace element analysis of dated sediments from Lake Michigan and Green Bay. 1980. (Civil Engineering)
T 9999 .C539	Chintalapati, Subramanian.    Z80 microprocessor based digital controller simulator. 1984.
T 9999 .C543	Chiu, Andrew Y.    Complexity of parallel arithmetic using the Chinese remainder representation. 1995. (Computer Science)
T 9999 .C546 1996	Choi, Yoon Young.    Effects of hot deformation on the properties of ductile iron. 1996. (Materials Engineering)
T 9999 .C5483x 2000	Chon, Woochong.    Investigation of flows around a rotating blade in a lawn mower deck. 2000. (Ph.D.)
T 9999 .C5488 1998	Chopada, Parag P.    Low-cost, high-performance construction materials using coal combustion by-products. 1998.
T 9999 .C549	Chopp, David L.    Gerontological data acquisition and analysis system. 1981.
T 9999 .C551	Choren, John A.    Spectroscopic studies of a constricted argon plasma arc. 1973. (Mechanical Engineering)
T 9999 .C552	Chou, Hai-Shen.    Study on particulate mass concentration and its size distribution. 1977.
T 9999 .C5526x	Chou, Tsong-Da.    On multivariate modeling for selective assembly of high-precision parts. 1995. (Ph.D.)
T 9999 .C553 2007	Chowdhary, Devansh.    UV and IR application of carbon nanotube based devices. 2007.
T 9999 .C5543 2006	Christiansen, Gregory C.    On optimal placement of strain gages for load recovery in components. 2006.
T 9999 .C555	Christman, Ann Pendergast.    Selective aliasing: a UNIX 1/0 command extension for the handicapped. 1988. (Computer Science)
T 9999 .C5585x	Chuang, Ta-Fu.    Non-homomorphic encryption schemes and properties of Chinese remainder theorem. 1989. (Ph.D.)
T 9999 .C559	Chudy, Frederick C.    Stability of thin elastic plates under variable symmetrically and unsymmetrically distributed in-plane loading. 1983. (Engineering Mechanics)
T 9999 .C55969x 2002	Chun, Youn-Moon.    Investigation on the use of pulp and paper mill residual solids in producing durable concrete, by Yoon-moon Chun. 2002. (Ph. D.)
T 9999 .C5597 1999	Chun, Yoon-Moon.    Manufacture of cast-concrete products using fly ash, bottom ash, and used foundry sand. 1999.
T 9999 .C5598 2004	Chung, Jaewoo.    New scheduling method to improve throughput for semiconductor fabrication. 2004.
T 9999 .C592	Clark, Chris.    Software tools for development of systems for the handicapped. 1985. (Computer Science)
T 9999 .C6715	Coel, Joseph B.    Thermodynamic properties of fluoropolymers: polychlorotrifluoroethylene, ethylene-tetrafluoroethylene copolymer, polyvinylidene fluoride. 1978.
T 9999 .C672	Coello, Freddy Rafael.     Deflections of continuous concrete beams. 1971. (Structural Engineering)
T 9999 .C723	Colsmith, Marcia Joy.     Productive introduction of computers: a guide for office managers. 1986. (Computer Science)
T 9999 .C762	Contini, Scott Patrick.     Implementation of the hypercube quadratic sieve integer factorization algorithm. 1994. (Computer Science)
T 9999 .C775	Coomar, Parmeshwar.     Procedure to determine workholding needs of manufacturing industries using the analytical hierarchy process. 1991.
T 9999 .C7965	Corech, Hertsel.     Computer graphics. 1978. (Electrical Engineering)
T 9999 .C797	Corey, Cletus A.     Determination of a higher order plane stress elastic solution of a shear strip as a basis for plastic analysis of brazed joints. 1971. (Engineering Mechanics)
T 9999 .C799	Corlu, Bulent.     Microstructure and mechanical properties of austempered Cu-V ductile iron. 1985. (Materials Engineering)
T 9999 .C8225	Corrado, Lawrence Carmen.     Multiple moving target interception problem. 1991. (Computer Science)
T 9999 .C823	Corrales, Jose M.    Finite element analysis of materials with different elastic properties in tension and compression-application to the interpretation of Brazilian tests on rocks. 1979. (Civil Engineering)
T 9999 .C844	Cotic, Dennis J.    Experimental study of crack nucleation, damage line, and fatigue limit for a straight bending specimen having a drilled hole. 1986.
T 9999 .C862	Coursin, Scott E.    Automation of a remote PC-data acquisition and control system for an innovative radon mitigation-heat recovery technique. 1994. (Industrial Engineering)
T 9999 .C875	Cowles, James William.    Algebraic coding for information storage and transmission. 1973. (Electrical Engineering and Computer Science)
T 9999 .C894	Crass, David A.    Efficient algorithms for searching a polygon. 1990. (Computer Science)
T 9999 .C9465	Cronce, Richard G.    Expanded compartmental model for the analysis of engineering systems. 1978. (Electrical Engineering)
T 9999 .C947	Cronin, Michael John.    Transformations in 6AL-4V-titanium. 1972. (Metallurgical Engineering)
T 9999 .C957	Cryns, Brendan James.    Effects of loading history and pre-exposure on the stress corrosion cracking of 7075 aluminum. 1984.
T 9999 .C9639 2005	Cuculi, Kim M.    Distal upper extremity musculoskeletal disorders in an equipment manufacturing plant: a corrrelation. 2005.
T 9999 .C968	Culver, Sheila T.    Engineering processing properties of peat and peat slurries. 1981.
T 9999 .C969 1997	Cumaranatunge, Terry.    Memory scalability in constraint-based multimedia style sheet systems. 1997. (Computer Science)
T 9999 .C971 1997	Cummins, James Calvin.    Neural network for current transformer saturation correction. 1997. (Electrical Engineering)
T 9999 .C978	Curtis, Daniel M.    System identification using an artificial neural network approach. 1991. (Computer Science)
T 9999 .C995	Cychosz, Lawrence W.    Face recognition system using holistic regional feature extraction. 1994. (Electrical Engineering)
T 9999 .C9953 2002	Cykana, Linda J.    Wrist and grip strength as a function of wrist posture and center of mass offset. 2002.
T 9999 .C997	Cyra, David James.    Traffic data collection through aerial photography. 1971. (Civil Engineering)
T 9999 .C9975	Cyranski, Ekaterini Sycara.    Some results on equivalence properties of synchronous models of parallel computation. 1974. (Electrical Engineering)
T 9999 .C998	Czarnecki, Richard John.    Effect of process variables on the scab corrosion of low carbon sheet steel. 1992. (Materials Engineering)

Return to Top of Alphabetical List

Author Names: D

T 9999 .D11628 2004	Dabra, Vandana V.     Modeling approach for Sigma Delta fractional-N frequency synthesizer. 2004.
T 9999 .D1163 2002	Dabra, Vanish K.     Digital frequency synthesizers for wireless communication. 2002.
T 9999 .D1166 2000	Dabrowski, James R.     Absolute thresholds of perception for changes in a graphical user interface. 2000. (Computer Science)
T 9999 .D129	Daharsh, Ross S.    Short circuit data recording using magnetic tape as a recording and storage medium for long duration test programs. 1981.
T 9999 .D131	Dahsheh, Wael M.     Limit surfaces for combined fracture modes. 1984.
T 9999 .D1345 2007	Dajani, Layali H.     Stability of optimal solutions to the progressive signal-timing problem. 2007.
T 9999 .D175	Dancs, Frank Bela.     Crypto-engine. 1987. (Computer Science)
T 9999 .D2118 1998	Daoud, Wessam Z.    Assessment of flexible thin-film membranes as a radon-resistant construction technique. 1998.
T 9999 .D21181x 2003	Daoud, Wessam Z.    Investigation on the use of an electromagnetic technology system to improve indoor air quality. 2003. (Ph.D.)
T 9999 .D213	Darakhani, Ali S.    Numerical studies by FEM of mechanisms of failure for reinforced concrete structure. 1986. (Civil Engineering)
T 9999 .D2283	Das, Sidhartha.    Expert system for system level diagnosis of faults in digital systems. 1985.
T 9999 .D2285	Das Ghosh, Ibha. Computer products liability, by Ibha Das (Ghosh). 1980.
T 9999 .D229	Das Gupta, Rathindra.    Effectiveness of vibrational stress relief in plain carbon steel weldments. 1974.
T 9999 .D249	Davida, Joseph I.    Generalized pipes. 1984. (Computer Science)
T 9999 .D265 1995	Davis, Wendy E.    Flexural behavior and bond strength of concrete beams reinforced with glass reinforced plastic rebars. 1995. (Civil Engineering and Mechanics)
	de leon, Peter Joseph    see     Diaz de Leon, Peter Joseph. [.D5425]
T 9999 .D286	DeBellis, Crispin L.    Fouling of a single phase double pipe heat exchanger by simulated geothermal brines under various chemical and hydraulic conditions. 1985. (Mechanical Engineering)
T 9999 .D292	December, John.    C++ CASE tool. 1991. (Computer Science)
T 9999 .D328	Dekema, Sandra Kay.    Higher order methods to solve elliptic singular perturbation problems. 1986. (Computer Science)
T 9999 .D359	Delneky, Gabor L.    Design of the first biological phosphate removal process in full scale operation in the U.S.A. 1973. (Civil Engineering)
T 9999 .D3599x 1999	DeLoach, Juanita.    Study of titania and titania-zirconia multilayer thin films deposited by reactive sputter deposition using oxygen and oxygen-argon plasmas. 1999. (Ph.D.)
T 9999 .D361	DeLoach, Juanita.    Symmetrical circuit modules for implementing Boolean functions. 1994. (Electrical Engineering)
T 9999 .D36659x 2001	Delva, Justin G. R.    Coherent PN sequence acquisition. 2001. (Ph.D.)
T 9999 .D3666 1997	Delva, Justin Gerard R.    Genetic algorithm for dynamic nonlinear system identification using recurrent neural networks. 1997. (Electrical Engineering)
T 9999 .D367	Delwiche, John T.    Ultrafiltration of electroplating rinse waters. 1980. (Civil Engineering)
T 9999 .D374	Dembiec, Dennis.    Pricing of a regional wastewater treatment system. 1983. (Civil Engineering)
T 9999 .D396	Denkenberger, Robert F.    Nitriding response of titanium containing steels, by Robert F. Denkenberger Jr. 1988.
T 9999 .D438	Derra, Kenneth William.    Friction and wear study of a titanium nitride surface treatment for an aluminum alloy. 1995. (Materials Science)
T 9999 .D4386 1996	Desai, Niraj A.    Non-invasive monitoring of breathing for emergency detection. 1996. (Electrical Engineering)
T 9999 .D441	Desai, Niranjan N.    Dynamic response of a load at the end of a cable due to shock and vibration conditions. 1977. (Engineering Mechanics)
T 9999 .D4415	Desai, Rajiv G.    Characterization of spurious response in a mixer. 1992. (Electrical Engineering)
T 9999 .D4559 2004	Deshmukh, Sudeep.    Optimum experimental design of a multi-axis load transducer. 2004.
T 9999 .D456	Deshpande, Anand A.    Performance evaluation of a transitive closure algorithm in distributed databases. 1990. (Computer Science)
T 9999 .D488 1997	Devarakonda, Gopal.    Analysis of the dielectric covered conducting rod. 1997. (Electrical Engineering)
T 9999 .D494	DeVilbiss, Warren.    Comparison of software complexity of programs developed using structured techniques and object-oriented techniques. 1993. (Computer Science)
T 9999 .D4944	Deviley, David Jon.    Nonlinear filtering by neural network. 1994. (Electrical Engineering)
T 9999 .D5267 2000	Dexter, Donald D.    Microwave scattering from ice crystals in cirrus clouds. 2000.
T 9999 .D5348 2003	Dhody, Gaurav.    Wet weather capacity improvements at the Jones Island Wastewater Treatment Plant: the role of selectors and secondary clarifiers. 2003.
T 9999 .D535	Dhulipala, Padmini.    Investigation of the properties of random graphs. 1993. (Computer Science)
T 9999 .D542	Diaz, Miguel A.    Selective withdrawal from a viscous two-layer fluid . 1980. (Civil Engineering)
T 9999 .D5425	Diaz de Leon, Peter Joseph.    Parallel implementation of an encryption coprocessor, by Peter Joseph de Leon. 1991. (Computer Science)
T 9999 .D5591	Diebels, Allison R.    Recodification and revision of the Code of the City of Cudahy, Wisconsin. 1965. (Civil Engineering)
T 9999 .D5592	Diefenthaler, Andrew A.    Computerized security system. 1977. (Computer Science)
T 9999 .D5595	Dieffenbach, Jack Earl.    Low-cycle fatigue behavior of steel weldments of various strengths. 1973. (Metallurgy)
T 9999 .D563	Dieringer, Jeffrey A.    Tools for analog encryption. 1988. (Computer Science)
T 9999 .D573	Diggelman, Carol.    Effect of particle size on sludge dewaterability. 1986. (Civil Engineering)
T 9999 .D582	DiMario, Michael J.    Design and implementation of a patient data management system. 1982.
T 9999 .D583	Dindinger, Philip M.    Effect of mean load on the fatigue strength of a fiberglass reinforced composite loop. 1986. (Engineering Mechanics)
T 9999 .D6184 1999	Divekar, Abhijit A.    Implementing lean manufacturing at Compact Technologies. 1999.
T 9999 .D621	Dixon, David Paul.    Investigation of the effect of carburized case depth and case hardness on bend strength and impact strength of AISI 1018, 1024 and 8622 steels. 1968. (Metallurgical Engineering)
T 9999 .D623	Djassemi, Manocher.    Hybrid cell approach to the problem of bottleneck machines in cellular manufacturing. 1990. (Industrial and System Engineering)
T 9999 .D6238x	Djassemi, Manocher.    Use of machine-grouping efficiency in comparison of job shop and cellular manufacturing system: a simulation study. 1994. (Ph.D., Engineering (Industrial and Manufacturing))
T 9999 .D631 1995	Doan, AnHai.    Abstraction-based approach to decision-theoretic planning for partially observable metric domains. 1995. (Computer Science)
T 9999 .D6653 2006	Doll, Nicholas.    Catalyst deterioration over the lifetime of small utility engines. 2006.
T 9999 .D6652 2004	Doll, Christopher T.    Determination of the operational cost associated with a radon mitigation subslab depressurization system. 2004.
T 9999 .D6657 1997	Domann, Rachel A.    Beneficial utilization of used foundry sands in portland cement concrete. 1997. (Civil Engineering)
T 9999 .D666	Domanski, Daniel James.    Personal computer simulation of stepping motors. 1985. (Electrical Engineering)
T 9999 .D6819 2006	Dong, Yao-Hsiang.    New efficient rescheduling algorithms for machine breakdown in a job shop. 2006.
T 9999 .D6858 2003	Donnellan, Jacob.    Experimental analysis of extended shear tab connections: a proposed design procedure. 2003.
T 9999 .D682	Dong, Yu.    Investigation of flow field and fuel spray in direct-injection diesel engines. 1991. (Mechanical Engineering)
T 9999 .D691	Dooley, John C.    Fumigation from power plant plumes in the lakeshore environment, by John C. Dooley, Jr. 1976.
T 9999 .D6915	Dooley, Thomas F.    Model for designing a microcomputer laboratory in an educational environment. 1979. (Computer Engineering)
T 9999 .D7135 2005	Dorneanu, Radu.    SNePSToJAM: conversion process and software for transformation of agent plans from SNePS to JAM. 2005. (Computer Science)
T 9999 .D71499x 2000	Doroodchi, Mahmood.    Fuzzy cluster filters and their applications in 1D and 2d signal processing. 2000. (Ph.D.)
T 9999 .D715	Doroodchi, Mahmood.    Fuzzy segment detection. 1994. (Electrical Engineering)
T 9999 .D7513x 1999	Downing, Robert Scott.    Analytical and experimental study of single and two-phase cooling in miniature straight and helical channels. 1999. (Ph.D.)
T 9999 .D758	Draeger, David J.    Torsional strength of driver configurations by finite element method. 1980. (Engineering Mechanics)
T 9999 .D761	Drake, Eric F.    Interaction of temperature dependent fracture mode transition with inclusion morphology in medium carbon steel. 1975. (Materials Engineering)
T 9999 .D776	Drew, David M.    Simultaneous nitrification and denitrification under low dissolved oxygen levels using complete mix reactors in series. 1980. (Environmental Engineering)
T 9999 .D779	Driesen, Gary E.    Evaluation of unsteady aerodynamic effects and effects of variations of elastic axis, center of gravity and aerodynamic center on dynamic response characteristics of rotor blades. 1973. (Engineering Mechanics)
T 9999 .D8117 2007	Dua, Namit K.    Simulation study of packet latency over beaconed ZigBee/802.15.4 networks 2007.
T 9999 .D812	Duarte, Ariani Wiener.    Investigations on the output memory of finite state machines. 1976. (Electrical Engineering)
T 9999 .D8122 2003	Duarte, Juan P.    Evaluation of mathematical models for performance of ramp meter on urban freeway systems. 2003.
T 9999 .D8662 2000	Dugall, Thomas H.    XPS analysis of three cubic boron nitrade composites. 2000.
T 9999 .D962	Durian, Stewart W.    Charging and discharging of Newtonian liquids in circular tubes. 1986.
T 9999 .D973	Duske, Wilfried Paul.    Motion of a particle in a rotary dryer. 1972. (Mechanical Engineering)

Return to Top of Alphabetical List

Author Names: E- F

T 9999 .E125 2000	Eapen, Sunil Mathew.    Numerical heat transfer analysis in three-dimensional transient cutting tool temperatures. 2000.
T 9999 .E15	Eben, Eric M.     Avionics computer diagnostic expert system. 1992. (Electrical Engineering)
T 9999 .E155x (MC)	Eberle, Richard Alan.     Characterization and forecasting of air pollutant concentrations using autoregressive-moving average models. 1973. (microfiche copy only) (Systems-Design)
T 9999 .E16	Ebert, John Arnold.    Discussion of the application of load tap changing to power transformers. 1971. (Electrical Engineering)
T 9999 .E22	Eden, Richard W.    Analysis of synthetic rainfall patterns on urban storm water runoff. 1977. (Water Resources Engineering)
T 9999 .E265 1999	Edwards, Mark Allen.    Non destructive evaluation of concrete structures based on magnetic flux leakage concepts. 1999.
T 9999 .E285	Eggert, Daniel M.    Torsional loading of cruciformed shaped shafts. 1991.
T 9999 .E29	Egges, Marcella C.    Application of data security management controls in a blood bank. 1984. (Computer Science) (2c)
T 9999 .E335	Eichers, Joseph D.    Mathematical analysis of the dynamic components of the ice resistance around an icebreaker in the continuous mode of operation. 1974. (Engineering Mechanics)
T 9999 .E34	Eigen, Daryl J. (Daryl Jay)    Unsupervised discrete cluster analysis. 1973. (Electrical Engineering and Computer Science)
T 9999 .E35	Einerson, Jay Scott.    Microcomputer to programmable controller interface. 1986. (Electrical Engineering)
T 9999 .E366x 2006	El-Afandi, Hamed.    Intelligent wireless ad hoc routing protocol. 2006. (Ph.D., "Computer Science")
T 9999 .E37x	El-Koushiry, Ahmed D.    Dynamic behavior of inverter-fed induction motors. 1979. (Ph.D., Electrical Engineering)
T 9999 .E374x	Elbalawy, Khaled M.    Creep failure in linear and nonlinear viscoelastic materials, by Khaled M. El-Balawy. 1992. (Ph.D., Civil Engineering)
T 9999 .E375	Elbalawy, Khaled M.    Stress fields associated with fracture occurring under biaxial loads. 1985. (Civil Engineering)
T 9999 .E38	Elefteriou, Katherine.    Employee retirement plan system. 1983. (Computer Science)
T 9999 .E41	Elger, Rodney R.    Expandable, general purpose peripheral control unit for automated process systems. 1979. (Electrical Engineering)
T 9999 .E42	Eliopoulos, George.    Design and applications of a storage tube image processing system. 1976. (Electrical Engineering)
T 9999 .E44 1996	Elkin, John A., II.     Coordinating wetland impacts from highway construction projects. 1996. (Civil Engineering)
T 9999 .E473 1999	Ellis, Devon S.    Energy approach for the calculation of deflection of reinforced concrete flexural members. 1999.
T 9999 .E475 2004	Ellis, Randall Harlan    Distributed motion algorithms that facilitate special modules in a mostly homogenous modular robot system. 2004. (Computer Science)
T 9999 .E48	Elmabrouk, Osama.    Investigation of coupled modes of oscillation of high rise buildings due to earthquake excitation forces. 1984. (Engineering Mechanics)
T 9999 .E494 1999	El-Sheikh, Hani Ali.    Enhancement of air jet impingement heat transfer using pin fin heat sinks. 1999.
T 9999 .E53	Emerick, Mark F.    Finite element analysis of rotor-bearing-foundation systems utilizing matrix reduction in both the rotor and foundation. 1985. (Mechanical Engineering)
T 9999 .E56	Endres, Linda Susan.    Knowledge-based system generation of predictive maintenance reports. 1991. (Computer Science) (2c)
T 9999 .E57	Eng, David.    Matrix-technique analysis of electric machines: as illustrated by detailed analysis of short-circuit responses of a synchronous machine. 1971. (Electrical Engineering)
T 9999 .E573	Eng, Lisa.    Programming languages. 1993. (Computer Science)
T 9999 .E575	Engel, Brian E.    Analog simulation of wind powered generators. 1977. (Electrical Engineering)
T 9999 .E64	Epping, Erin L.    Thermal and stress analysis of a surface mounted chip capacitor assembly using the finite element technique. 1985.
T 9999 .E65	Erbes, John R.    Three-dimensional object modeling for computer graphics. 1979.
T 9999 .E67	Erhunmwunsee, Paul Ovenseri.    Estimating annual average daily traffic flow from short period counts. 1982.
T 9999 .E674 1999	Erickson, Anne M.    Effects of posture, weight and time up in short cycle overhead repetitive work. 1999.
T 9999 .E675	Erickson, Curtis Allan.    Effect of post metallization exposures on the morphology of Ti/Pd/Au sequentially deposited thin films. 1994.
T 9999 .E68	Eriksen, Alf R.    Central area transit simulation model. 1972. (Systems-Design)
T 9999 .E74 1996	Escuder, Ignacio.    Synthesis of dam safety protocol. 1996. (Civil Engineering)
T 9999 .E745	Eskender, Hezekiel.    Numerical solution of the energy equation for molten flowing polymers. 1981. (Mechanical Engineering)
T 9999 .E746	Eskender, Kidest.    Optimizing the wave soldering process. 1993. (Industrial Engineering)
T 9999 .E747	Eskender, Konjit.    Nonlinear finite element analysis of reinforced concrete beams. 1990. (Civil Engineering)
T 9999 .E75	Eskra, Gary M.    Alternating current transmission line electric field reduction for compliance with the 1977 National Electrical Safety Code. 1980. (Electrical Engineering)
T 9999 .E76	Eslami, Majid.    Interfacial stability of co-current two phase flow in horizontal pipes. 1991. (Mechanical Engineering)
T 9999 .E81 1997	Estill, Brian T.    Comparison of a modified batch-least squared error technique versus variable regression estimation in delay and system identification. 1997. (Electrical Engineering)
T 9999 .E885x 2002	Eungdamrong, Duangrat C.    Study of the radio frequency nonlinear circuits for wireless communications. 2002. (Ph.D.)
T 9999 .E915	Evans, John Holmes.    Radiation exchange factor calculation by Monte-Carlo beam tracing in a three-dimensional rectangular enclosure with an absorbing, emitting, scattering medium. 1990. (Mechanical Engineering)
T 9999 .E92	Evans, William D.    Finite element study of interlaminar stresses in graphite epoxy composites. 1980. (Engineering Mechanics)
T 9999 .E93	Eveline, Luis R.    Use of 7Be and 210Pb in geochronology of lake sediments. 1988.
T 9999 .E96	Exner, Gary A.    Determination of components of displacement using image plane holography. 1977.
T 9999 .F174	Fait, Ronald J.    Pressure gradients upstream of differential--type flowmeters. 1974.)
T 9999 .F19849x 2006	Familiant, Yakov L.    AC impedance measurement techniques in power systems, by Yakov Lvovich Familant. 2006. (Ph.D.)
T 9999 .F1985 2001	Familiant, Yakov L.    New cascaded multi-level H-bridge drive. 2001.
T 9999 .F199	Fan, Chich-Ping.    Stokes-flow drag on a sphere accelerating rectilinearly in an elastico-viscous fluid. 1977.
T 9999 .F1995	Fan, Chin-Wen.    Model of single payment present worth factor under normally distributed inflation and interest rates. 1981. (Industrial and Systems Engineering)
T 9999 .F1997	Fan, Siqi.    Electromagnetic analysis of the layered media excited by a coaxial line. 1989. (Electrical Engineering)
T 9999 .F2193 2004	Farah, Mustafa.    Statistical behavior of artificial neural networks. 2004
T 9999 .F223	Fargo, Patrick A.    Image processing. 1974. (Electrical Engineering)
T 9999 .F234 1997	Farmer, David D.    State of the art in statewide travel demand forecasting: review and recommendations. 1997.
T 9999 .F245	Farrell, Brian Lee.    Computer network based facsimile system. 1993. (Computer Science)
T 9999 .F252	Fatemi, Gholam Reza.    Comparative study of allowable stress design and load and resistance factor design. 1989. (Civil Engineering)
T 9999 .F2522x	Fatemi, Gholam Reza.    Evaluation of post-tensioned concrete bridge structures by the impact echo method. 1992. (Ph.D., Civil Engineering)
T 9999 .F3315	Feng, Eric Y.    Computer simulation of diffusion-kinetics in electrochemistry. 1987. (Computer Science)
T 9999 .F3317x	Feng, Hu-sheng.    In situ stress determination by borehole fracturing: a fracture mechanics approach, by Husheng Feng. 1990. (Ph.D., Civil Engineering)
T 9999 .F332	Feng, Maryann M.    Computer-assisted learning of Chinese characters using multi-table hashing scheme. 1985. (Computer Science)
T 9999 .F337x 1995	Fennigkoh, Larry.    Mediating effects of wrist reaction torque on grip force production. 1995. (Ph.D., Industrial & Manufacturing Engineering)
T 9999 .F3532x 2006	Ferguson, J. Bryce.    Oxidation products of inconel alloys 600 and 690 in hydrogenated steam environments and their role in stress corrosion cracking. 2006. (Ph.D.)
T 9999 .F353	Ferguson, J. Bryce.    Environmentally assisted cracking in grain-oriented aluminum alloy 8090. 1994. (Materials Engineering)
T 9999 .F3559x	Feria, Ying Jiang.    Nonuniform sampling of continuous signals and linear processing of nonuniformly sampled signals. 1990. (Ph.D., Electrical Engineering)
T 9999 .F356	Feria, Ying Jiang.    Systematic simulation for nonuniform sampling. 1987. (Electrical Engineering)
T 9999 .F3565x	Feria-Kaiser, Vicente Alfonso.    Dynamic modeling of flexible rotor shafts mounted on hydrodynamic bearings. 1987. (Ph.D.)
T 9999 .F363	Fernandez, Adriana F.    Relationships between attributes in heterogeneous distributed databases. 1991. (Computer Science)
T 9999 .F459	Fielding, Linda K.    Using a neural network to decode convolutional codes. 1995.
T 9999 .F4957 2003	Fineour, Matthew J.    Storm water analysis of the Mech's Pond sub-basin, Town of Mount Pleasant, Racine County, Wisconsin. 2003. [CD-ROM in back of book]
T 9999 .F497	Fingleton, Donald John.    Trace element analysis of atmospheric particulates over southern Lake Michigan. 1976. (Energetics)
T 9999 .F498	Finigan, Maureen Good.    Knowledge acquisition for decision-theoretic planning. 1995. (Computer Science)
T 9999 .F515	Finogenov, Alexander.    Remote graphical user interface. 1992. (Computer Science)
T 9999 .F518 1998	Fiorentino, Dean Anthony.     Surface studies of yttrium aluminum garnet, perovskite and nitride materials. 1998.
T 9999 .F521	Fiorina, Mark Arthur.    Numerical solutions of non-Newtonian pipe flow with a time-dependent pressure gradient. 1978.
T 9999 .F5284 1996	Fischer, Bruce C.    Band limited systems and controlled frequency response with application to tapered transmission lines. 1996. (Electrical Engineering)
T 9999 .F529	Fischer, Kenneth C.    Double heterostructure light emitting diodes as surface junction transceivers. 1983. (Electrical Engineering)
T 9999 .F5535 1997	Fitzgerald, Janice Arline.    Experimental investigation of the flow field in a confined and submerged impinging jet. 1997. (Mechanical Engineering)
T 9999 .F554	Fitzgerald, Richard W.    Corrosion of copper-to-stainless steel braze joints in potable hot water solutions. 1991. (Materials Engineering)
T 9999 .F566	Fixel, Michael R.    Heuristic algorithm for the asymmetric traveling salesman optimization problem. 1995. (Computer Science)
T 9999 .F671	Folwell, Nathan Thomas.     New algorithm for sorting on mesh-connected computers. 1994. (Computer Science)
T 9999 .F6755	Fonstad, Kenneth A.     Design of a waste handling system for a veal feedlot. 1977.
T 9999 .F676	Fonstad, Mary F.    Should refuse-derived fuel be densified? 1976.
T 9999 .F699	Ford, Gary P.     Markov model-based approach to optical character recognition and verification. 1990. (Electrical Engineering and Computer Science)
T 9999 .F716	Forest, Debra L.     Automated theorem prover. 1991. (Computer Science)
T 9999 .F732	Forslund, John L.     Forecasting residential land-rents using a joint-travel -- land-use equilibrium computer model. 1993.
T 9999 .F752	Fossman, Raymond G.     Effect of translation and rotation springs at the end of a uniform beam on the natural frequencies and principal modes of vibration. 1977. (Engineering Mechanics)
T 9999 .F786	Fowler, Katherine Ann.     Independence-preserving generation of Bayesian networks from probability logic knowledge bases. 1993. (Computer Science)
T 9999 .F828	Frank, William Robert.    Investigation of critical speeds and rotor dynamics for whirling flexible shafts. 1990. (Mechanical Engineering)
T 9999 .F8289x	Frankel, Yair.     Non-interactive multiparty cryptography. 1992. (Ph.D.)
T 9999 .F829	Frankel, Yair.     Two issues in cryptology: algebraic analysis of DES and a shared public key system. 1989. (Computer Science)
T 9999 .F834	Franks, John William.     Effects of lattice disorder on the thermodynamic properties of ordered binary intermetallic phases. 1971. (Metallurgy)
T 9999 .F837	Franzel, Roger A.     Hybrid finite element method utilizing high frequency Moire interferometry. 1985.
T 9999 .F845	Frauenfelder, Jeffrey J.     Overland flow simulation using a microcomputer. 1980. (Civil Engineering)
T 9999 .F873	French, Donald H.     Design methodology for 4th generation language system development. 1982. (Electrical Engineering)
T 9999 .F889	Freund, Dwight D.     Comprehensive algorithm for computer graphic construction of tangent arcs. 1986. (Computer Science)
T 9999 .F911x	Friedman, Oved.     Structural development in manufacturing firms. 1981. (Ph.D.)
T 9999 .F912	Frieseke, Richard W.    Enhancement of well yield and subsequent groundwater remedial efficiency through the implementation of a granular groundwater collection system. 1993. (Civil Engineering)
T 9999 .F932	Fromm, Frederick R.    On the topic of cluster analysis. 1973. (Electrical Engineering)
T 9999 .F9325	Frommholz, Michael L.    Methods of building management as applied to home control. 1982. (Electrical Engineering)
T 9999 .F949	Fu, Chu-Chang.    Effects of thermal radiation on the attenuation of the radiological consequences from hypothetical core-disruptive accidents of fast breeder reactors. 1978.

Return to Top of Alphabetical List

Author Names: G

T 9999 .G124	Gadhvi, Rajendra S.    Finite difference solution of the consolidation equation for time-dependent loading and impeded drainage. 1987. (Civil Engineering)
T 9999 .G132	Gagas, John M.    Evaluation of Co -- and counter current regeneration of ion exchange resins for water softening. 1991. (Civil Engineering)
T 9999 .G162	Gallagher, Brian J.    Analysis of winter heat exchange in southern Lake Michigan. 1971. (Mechanics)
T 9999 .G1942 1999	Gamroth, Timothy C.    Realization of analog to digital converter utilizing mixed mode integrated circuit technology. 1999. (Electrical Engineering)
T 9999 .G2133x 1999	Gao, Jianbo.    Image sequencing segmentation. 1999. (Ph.D.)
T 9999 .G2115 2004	Gao, Xiaobing.    Mercury adsorption and liberation study. 2004.
T 9999 .G216	Garcia-Maura, Fernando.    Filtration of polydispersed particles through multimedia filters. 1984. (Civil Engineering)
T 9999 .G232	Garimella, Soma Sekhar.    Cost and performance modeling of printed wiring assembly manufacturing systems. 1994. (Industrial & Manufacturing Engineering)
T 9999 .G233	Garlid, George M.  &nb